MPPS V18, Kess V2, KTAG 2.25, FgTech 4: Best price, Free download, Comparison, Reviews

MPPS V18, Kess V2, KTAG 2.25 and FgTech 4 are all hot-sale ECU programmers at eobdtool.co.uk. Here share the newest price, free download link and customer reviews of these tools.

Part 2: MPPS V18, Kess V2, KTAG 2.25, FgTech 4 Free Download
Part 3: MPPS V18, Kess V2, KTAG 2.25, FgTech 4 Comparison
Part 4: MPPS V18, Kess V2, KTAG 2.25, FgTech 4 Reviews

1.Price:
MPPS V18.12.3.8 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable: 62 euro free shipping (was 82 euro!)



Kess V2 V5.017 Euro version: 59.99 euro free shipping (was 64.99 euro)




Red PCB V2.25 Ktag V7.020: 63.99 euro free shipping (was 69.99 euro)


Note: Kess V5.017 Plus Ktag V7.020 is cheaper than only buying one ECU. (Only 110 euro free shipping, was 119 euro)

Source: http://www.eobdtool.co.uk/wholesale/red-pcb-kess-v5017-plus-ktag-v7020.html


FGTech 0475 Galletto 4 Master V54: 48 euro free shipping (was 60 euro)

Source: http://www.eobdtool.co.uk/wholesale/fgtech-0475-galletto-4-master-eu-version.html 

 

2.Free Download:

Firmware version: 1.08.21, Software version: V18.12.3.8
It has features below:

Crack version

No need pass

Tested without issues
So, 100% working on MPPS hardware v21 & hardware v18
Note: MPPS V18 O.S: Windows 7 OK, but WIN XP, WIN 8, WIN 10 needs luck

Kess V2 free download on Mega:

Password: laura168
Firmware Version: V5.017, Software Version: V2.47 (Newest)
Update: By link
OS: Works on Win XP / Win7 32 bit, Win 8, etc. 
Language: English/ German/ Spanish/ Italian/ Portuguese/ French
Car Models: For Multi-cars and trucks, no year limited

Ktag 2.25 free download on Mega:
Hardware Version: V7.020, Software Version: V2.25 
Update: By CD or Download link only
O.S: Works on XP, WIN7 (Try on WIN8 WIN10 at your own lucky)
Language: Italian, Deutsch, English, French, Portuguese, Spanish
Works on almost all Kess master (SE135SE135-B1,SE135-E)
But SE135 has a different driver as SE135-B1 and SE135-E, so their installation method is a little different.

FgTech free download on Mega:
Password: cooked2017
Firmware: FGTECH 0475, Software Version: V54 2012/02
Update: By link
O.S:  Windows XP, Windows 7 32-bit
Unlock version, can use directly, no need to activate.
Language: English, Spanish, French, Italian, German, Czech, Portuguese, Turkish
Car Models: Compatible for cars (12V), trucks (24V), motorcycles, Marine, BDM MPCxx, BDM Boot Mode, checksum. 
3.MPPS V18 vs. KESS v2 vs. KTAG vs. Fgtech 2/4 (Communication):
Communication/
ECU tools
OBD2
BOOT
BDM
JTAG
Tricore
MPPS V18



KESS v2



KTAG


FgTech 2 /
Fgtech 4


So, 3 options are available for OBDII connection: mpps v18, kess, fgtech

3 options for BOOT: kess v2, k-tag, fgtech galletto

2 options for BDM: ktag, fgtech

2 options for JATG: ktag, fgtech 4/2

Only 1 way for Tricore: MPPS V18!

4.MPPS V18, KESS v2, KTAG, FgTech 2/4 Reviews:
1)MPPS V18 reviews
Astra h 1.9 tva off OBD and Zafira B 1.9 EGR off OFF ok, just choose read all( where avaible)
simos pcr 2.1 R/W obd ok
was unlocked few months ago with ktag
ME7.3.H4 boot mode read /write full OK
Peugeot 807 ECU DELPHI DCM 3.5 READ OBD OK
MED17.4 peugeot 207 read write ok
Citroen c5 DCM3.5 read write OBD ok, checksum ok
Opel cdti 1.7 ecu Denso R/W ok
Linea 2011 Marelli 6F3 read/write OBD Trought K-line, ( FG 54 read only flash trought CAN)
VW PCR 2.1 work v18 clone no problem
read and write on bench
Fiat Scudo as (Peugeot 3008) 2.0 HDI Delphi DCM 3.5
R/W OBD/CAN (CRC=OK) = OK
Fiat Stilo IAW6JF.P3, through OBD, mpc and eeprom read write for immo-off, all ok.
multyboot OBD
Ford Fusion 1.4 TDCi Siemens Sid 804 R/W OBD CAN = OK
DENSO_SH7058_OPEL
cdti zafria B z17dtj 2010 kw 108-81
worked for me..also astra J on 2011 with Denso 1.5mb

It works perfectly with PCR 2.1
Read written FLESH + MPC + EEPROM fiat marely 6f3, OK through OBD.
There are few tools that read-write EEPROM marely by OBD.
OBD-flash reading 3min 20 sec., 45 sec-writing.
MPC and EEPROM read OBD-20 seconds, 20 seconds writing (multyboot OBD) .A very strong and stable tool.
Ecu Selection = Volkswagen Passat 2.0 TDI Siemens PPD 1.X 
Bosch Hardware Number: 03G906018CD
Vw Software Number: 03G906018CD
System Type Number: R4 2.0l PPD1.5 G
R/W OBD/CAN = OK
Ford Fusion Style 1.6 TDCi Bosch EDC16C34-2
Software Number 1 : 1037377399
Software Number 2 : 1037377399
Ford Hardware Number : 9653239880
Ford Software Number : 5255A56D10
Ecu Type : BOSCH EDC16C34/2.2
R/W OBD/CAN = OK .... after write not error OBD scanner.

2) Kess V2 V5.017 master reviews
EDC 15/16/17 basics work fine.. Kline an Can ok
lot of denso ok ,tested today on 2016 navarra 2.5L 144hp (7059) all fine..via OBD of course (check ktag for jtag,tricore and others... )
(The EDC17 made by OBD are Audi, bmw and renault without Tp) 
Kess accept virtual read i test on AUDI A5 2.0 TDI 143hp 2013 EDC17CP46. it"s ok by obd
ksuite Sw reset token when open, same as all kess 5.017 or new ktag 7.020/26 Fw.
Berlingo 9HX: only readID from engineand works ok
PSA Bosch EDC 16: read ok
Skoda Octavia 1.9 AXR EDC15: read ok
BMW EDC17CP02: OBD write ok
BMW EDC15: OBD read/write ok
Ford Mondeo SID206: read/write ok
K-line and CAN both OK
VW EDC17CP14: read/write with tricore module
2008 Sprinters with Edc16: no issues
KESS V5.017 can support car/truck/tractor/Bike…support both 12V and 24V vehicle..and newer vehicles
KESS V5.017 has no grey protocols .full protocols such as EDC17/k-line/DSG/DQ200 DQ250 DQ500 Gearbox/ST10….
3)Ktag KTM100 firmware 7.003 reviews
K-tag KTM100 firmware 7.003 reviews... here you go.

Interface Tested.It works great.
Made a 116d F20 successfully. Good job !

KTM100 is just 6.070 firmware transferred to trasdata which is equivalent to 7.003 on KTM100

Ktm 100 100% Working on Bmw F31 335Xdrive, i have ever tried it. Working!!.

tricore boot mode ktm100 test read ok
test ecu med17.1.1 audi a8 v8 2012y
writing : no
ecu clon no

ktm100 can make edc17c64. where to find fake firmware v7.003 to upgrade v6.070, then there is posible to make edc17c64 on eu clones.

ktag and dimsport ktm100 is the same hardware with separate software.

There is no Update from version 6.070 to 7.003, because Board is different, Board is from Dim Sport, and Software too.

read and write without problem, i cannot believe there, but there is true.

My friend have Ktag v7.003 clone and he made edc17c64 without problem.

I try it with edc17c64; reading ok,writing ok

4)Fgtech Galletto china clone test report:
Via OBD
ALFA ROMEO
· edc15c7
· ME 7.3.1
· edc16c39 
· edc16c39 read time 40 MINUT!
· id Alfa 147 immo off (k line /boot mode)

BMW
· edc16c31 obd
· BMW X5 2007 3.0TDI
· EDC16 OBD
· BMW 525 (E39)
· BMW 320D E46
· bmw e90

FIAT
· Grande Punto read 1_3 MJT 75 hp

MERCEDES
· EDC15C5
· edc5c2
· delphi CRD2

OPEL
· EDC16c9
· Opel Corsa-D CAN

PSA
· edc15c7 boot mode (ID problems)
· EDC 16C34
· EDC16c3 K line
· edc16c34

RENAULT
· Renault Delphi 2007 k-line

VAG
· edc15v
· EDC15-P
· edc15 
· Golf Plus 2006 2.0TDI
· EDC16U34
· A4 2.0 tdi 2008
· Skoda octavia vrs 2005
· EDC15P K lINE
· VW crafter READ
· VW Golf5 1.9TDI
· Audi A6 V8 4.2l Petrol (over OBD fuse for dash fuse 11 or 15 , but it worked after pulling the fuse for dash and it went 100%)
· med9.1 
· edc17cp14
· EDC17
· But edc17cp20, edc17cp44, etc, etc same year, have tricore protected active, and if you write in obd, ecu bloqued.

Via BDM
· BMW E70 3.0D EDC16
· bmw. edc16c35
· (Opel) EDC16c9
· iveco edc16 BDM
Via BOOT TRICORE

Post a Comment

Previous Post Next Post