With the new DB25 adapter, CG Pro 9S12 key programmer can read Porsche BCM 1N35H and 5M48H more conveniently, no need to dismantle the chip. Go ahead to check the guide to read BCM 1N35H.
Main tools need:
Porsche BCM module
CG Pro 9S12 programmer V2.2.0.0 or above
New DB25 adapter
Note: Buy CG Pro 9S12 programmer full version get free new DB25 adapter
Please kindly notice:
You have to make sure the CG Pro 9S12 software is V2.2.0.0 or above. The Porsche BCM-1N35H and 5M48H models have been added in the Immobilizer option in the V2.2.0.0 software.
CG PRO 9S12 V2.2.0.0 (Jan. 10th, 2020) update info:
1. Immobilizer added support
Porsche BCM-1N35H (Convenience) (Requires a dedicated adapter!)
Porsche BCM-1N35H (Convenience PFLASH) (Requires a dedicated adapter!)
Porsche BCM-5M48H (Convenience) (Requires a dedicated adapter!)
Porsche BCM-5M48H (Convenience PFLASH) (Requires a dedicated adapter!)
4. Key, added support
Porsche BCM-1N35H (Convenience) (Requires a dedicated adapter!)
Porsche BCM-5M48H (Convenience) (Requires a dedicated adapter!)
Free download the newest CG Pro 9S12 software V2.2.2.0 here: https://mega.nz/#F!iaZWxSKK!qUCFas1gnSK2EVAOgZGN0w
Guide to read Porsche BCM 1N35H by CG PRO 9S12:
Connect CG PRO 9S12 device to computer
Run CG Pro software
Click Model option
Select Immobilizer-> Porsche-> BCM 1N35H (convenience)
Click Diagram-> choose Porsche BCM 1N35H 5M48H (Ceramic convenience)
Click Fullscreen to see the diagram clearly
Remove the BCM shell and take out the circuit board smoothly
Follow the wiring diagram to wiring DB25 adapter with Porsche BCM module
Then connect to CG PRO 9S12 device
After wiring, click Read to read data
Note: Don’t disconnect in the reading process.
Read data successfully, then save data
Finish saving data
Complete!
For your convenience, here is the video of CG PRO 9S12 read Porsche BCM-1N35H:
Besides Porsche BCM 1N35H and 5M48H (Convenience), CG PRO 9S12 also can read BMW CAS4-5M48H and 1N35H (Convenience) without soldering, please refer to this article: