Program 2011 BMW CAS3++ Key by OBDSTAR X300 DP PLUS

It’s tested ok to add a new key to 2011 BMW CAS3++ using OBDSTAR X300 DP Plus key programmer.

 

Car: BMW CAS3++ 2011

Device: OBDSTAR X300 DP Plus 8 Inch tablet key programmer full version

 

Step-by-step guide to add new keys:

Connect X300 PAD2 to vehicle OBD port

Then operate X300 DP Plus tablet

Select Diag Program-> IMMOBILISER-> BMW-> BMW/Mini V30.36

Initializing diagnostic data…

Choose CAS1/CAS2/CAS3-> AUTO

Note: This function is available by connecting the server, please ensure the internet connection is normal.

Select Program Key-> Add Keys

Turn on the ignition

If all keys are lost, insert a blank key and press the Start button

It will take about 2 minutes to read RAM…

Remove the key from the ignition

If it’s a smart key, please take it out of the car.

Reading key information…

Select one key position not used to program

Connect P001 with X300 DP PAD2

Place an original key into the P001 adapter

Then take out the original key and insert the new key into P001 adapter

Make the dealer key successfully

Insert the generated key into the ignition for 5 seconds

Finally, test the new key

 

Attach the full BMW IMMO function list for reference.

BMW V30.34(H):

Brand	Area	Model	Key Type	Show key count	Pin Code Read	Add Keys	All key Lost	Program Remote	Other Function	Marks
BMW/MINI	ALL	CAS1/CAS2	REMOTE/PROXIMITY	✔	✔	✔		✔	Vehicle Information Backup And Restore Key Data Program And Erase Key Enable And Disable Key Synchronize ELV Synchronize DME Erase DTC Transport Mode	generated key only via P001
BMW/MINI	ALL	CAS3	REMOTE/PROXIMITY	✔	✔	✔	✔	✔	Vehicle Information Backup And Restore Key Data Program And Erase Key Enable And Disable Key Update CAS3(ISTAP) Synchronize ELV Synchronize DME Erase DTC Transport Mode	Support CAS3/CAS3+ generated key only via P001
BMW/MINI	ALL	CAS(KLINE)	REMOTE/PROXIMITY	✔	✔				Version Information Reading Key Information Reading Key Enable Key Disable
BMW/MINI	ALL	DME/DDE ISN	REMOTE/PROXIMITY		✔				ECU Information Read ISN Delete Transport Mode Support List
BMW/MINI	ALL	CAS4	REMOTE/PROXIMITY	✔	✔				Key Information Reading Key Programming Key Enable Key Disable

 

BMW V30.34 (DS):

Brand	Area	Model	Key Type	Show key count	Pin Code Read	Add Keys	All key Lost	Program Remote	Other Function	Marks
BMW/MINI	ALL	CAS1/CAS2	REMOTE/PROXIMITY	✔	✔	✔		✔	Vehicle Information Backup And Restore Key Data Program And Erase Key Enable And Disable Key Synchronize ELV Synchronize DME Erase DTC Transport Mode	generated key only via P001
BMW/MINI	ALL	CAS3	REMOTE/PROXIMITY	✔	✔	✔	✔	✔	Vehicle Information Backup And Restore Key Data Program And Erase Key Enable And Disable Key Update CAS3(ISTAP) Synchronize ELV Synchronize DME Erase DTC Transport Mode	Support CAS3/CAS3+ generated key only via P001
BMW/MINI	ALL	CAS(KLINE)	REMOTE/PROXIMITY	✔	✔				Version Information Reading Key Information Reading Key Enable Key Disable
BMW/MINI	ALL	DME/DDE ISN	REMOTE/PROXIMITY		✔				ECU Information Read ISN Delete Transport Mode Support List
BMW/MINI	ALL	CAS4	REMOTE/PROXIMITY	✔	✔				Key Information Reading Key Programming Key Enable Key Disable

 

FYI

 

There is only a one-year free update online for OBDSTAR X300 DP Plus. After the first year, the original update cost is 499USD/year, but now if you order from eobdtool.co.uk, you just need to pay 381 euros for 13 month update subscription.

No need shipping! After your payment, please send the serial number of your x300 dp plus device to your dealer.

The promotion is from May 13^th to June 30^th. Don’t miss it!

 

OBDSTAR X300 DP Plus (A+B+C) Full Configuration Update Service for One Year Subscription:

http://www.eobdtool.co.uk/wholesale/obdstar-x300-dp-plus-update-1-year-subscription.html

 

OBDSTAR X300 DP Plus PAD 2 Tablet key programmer C package from the UK:

http://www.eobdtool.co.uk/wholesale/obdstar-x300-dp-plus-key-programmer-full-version.html