Customer problem: I used Foxwell NT530 BMW to clear service engine lights and reset oil on my BMW 2006 (E46) Coupe, but both failed.
The solution offered by eobdtool.co.uk engineer:
1.For the issue of clearing service engine lights:
Please check what info it prompts when clear engine light. If there is still a fault code after clearing, you need to clean the code after troubleshooting.
2.For the issue of oil reset:
It only can be done by Manual Reset.
Please do it as below:
Step 1: Turn off the ignition
Step 2: Press and hold the TRIP ODOMETER button in the instrument cluster and turn the ignition to Accessory (1)
Step 3: Keep the button pressed for approximately 5 more seconds until OIL SERVICE RESET (RE) or INSPECTION RESET (RE) appears in the display. Then release the button
Step 4: Press and hold the button again for approx. 5 seconds until RE or RESET flashes in the display. Then release the button
Step 5: With the display flashing, press the button briefly to reset and display the new Service Interval. After this, END SIA appears on the display for approximately 2 seconds.
If you have the same problem as FOXWELL NT530 Multi-System Scanner above, try to use the method provided to solve it. Welcome to give us feedback to let us know the result.
Tech support: www.eobdtool.co.uk