GODIAG V600-BMW: Firmware Update+ Advanced Features+ Account Management

GODIAG V600- BM diagnostic head can read & clear fault codes, read data stream, actuation test etc. for BMW, MINI and Rolls-Royce BMW-Model. Works well with the Internet and Printer. It also can be used with BMW ICOM software to allow you to use it with a laptop directly. Here will share some using tips incl. firmware upgrade, advanced features, account management for the newbies.

Part 1: GODIAG V600 BM Firmware Upgrade

All devices required:

GODIAG V600- BM with BMW ICOM software

GODIAG FEM/BDC Test Platform with OBD2- DB25 cable

BMW FEM/BDC module

Computer

Main steps:

Step 1: Connect all devices properly

Note: remember connecting V600- BM to the computer via the USB cable

Step 2: Run STTech.AnyVCI.UpdaterStarter.exe

Input the available user name (e-mail) and password to sign in

If you don’t have an account, you should register firstly, follow this post to do.

GODIAG V600- BM Diagnose FEM/BDC Module with GODIAG FEM/BDC Test Platform

Note: you also can learn how to update V600 BMW license and diagnose FEM/BDC module from the post.

Step 3: Connect the device detected out

Step 4: Enter the “Product upgrade” function

Select the newest version to download

Wait a moment till the process is done and you will see “Have downloaded”

Click the version again to upgrade

It starts to transfer the data.

When the file transfer has been completed, the device is about to be upgraded. It will take about 4- 5 minutes. Do not cut off the power during the process.