OBDSTAR MS80 Motorcycle scanner has been confirmed to figure well in 2016 DUCATI DIAVEL FL all systems diagnosis with M037 DUCATI connector.
Main operation steps:
Connect OBDSTAR MS80 to the OBD2 port of DUCATI Motorbike using the main cable with M037 DUCATI connector (located under the back seat)
Tap “DP” – > “Moto Diag” -> “Europe” -> “DUCATI” -> “DUCATI V30.02”-> “Auto identify (VIN)”
Read out the VIN code of the vehicle and confirm if it is correct
It can be used to diagnose all systems incl. ENG, ABS, Activations, BBS, Code and reset, and Hands-Free.
ENG:
Select “Melco (2015-)”
It’s able to do the following common basic diagnostic functions.
*Read ECU information
*Read fault codes
*Erase fault codes
*Read data flow
*Value Live Data
-State Live Data
*Active Test
*Special function
ABS:
Select “Bosch-9M (2015-)”
It can be used to do the functions as below.
*Read ECU information
*Read fault codes
*Erase fault codes
*Read data flow
*Active test
Activations:
Select “(2015-)”
Then it can do as below.
*Read ECU information
*Read fault codes
*Erase fault codes
*Active test
BBS:
Select “Egicon (2015-)”
It supports the following functions.
*Read ECU information
*Read fault codes
*Erase fault codes
*Read data flow
*Active Test
*Special function
Code and reset:
Select “(2015)- Code and Reset list”
It supports the following functions.
*Read ECU information
*Read fault codes
*Erase fault codes
*Special function
Hands Free:
Select “ZAD (2015)-”
*Read ECU information
*Read fault codes
*Erase fault codes
*Read data flow
Done!
FYI…
Check the full newest OBDSTAR MS80 car list for DUCATI Diavel all systems diagnosis, click the link below:
http://blog.eobdtool.co.uk/obdstar-ms80-2016-ducati-diavel-fl-all-system-diagnosis/