Free download the newest Iprog+ Pro clone software V85 and install it correctly on your Win7/ Win10 following the related installation guide.
Free download Iprog+ Pro V85 software:
https://share.weiyun.com/puRcPZ6G
Password: oipqga
Size: 998.64MB
Security: No risk!
O.S: Win7 & Win10 (Win7 is recommended), Win8 (need luck)
Language: English and Russian
Functions: airbag, dashboard, car radio, ECU, EEPROM, IMMO, MCU and special functions
Compatible device: all iprog pro ECU programmers incl. item No. SE147-C, SE147-B and SE147-1
Note: works with Probes Adapters can make your work much easier without soldering.
Guide to install iprog pro+ V85 on Win7:
Watch the video carefully which has been successfully tested by eobdtool.co.uk engineer on Win7.
Watch the video carefully which has been successfully tested by eobdtool.co.uk
Main steps:
Step 1: Unzip the iprog V85 folder to local C disk (takes about 1 min)
Step 2: Install iprog driver software
Right click “Computer” and select “Manage”
Go to Computer Management interface
Select “Device Manager”-> “Other devices”-> right click “iProg universal programmer”-> Update Driver Software
Select “Browse my computer for driver software”
Search for the driver software in Local disk (C:)/ IProg V85/IPROG Driver/iprog_win2k-win7_x86-x64_version2
Click “OK”
Then click “Install this driver software anyway”
When the driver software has been installed successfully, you can see the iProg+ universal programmer (COM4) appears on the screen.
Step 3: Run iProgProV85 software
Go to Local C disk/iProg V85/ iProg+V85
Send “iProgProV85” application to the desktop
iProg Pro V85 software is ready to use, then you can do any function supported.
e.g. read MB_ir IR_v2
Read key version, info, etc. successfully
Done!
http://blog.eobdtool.co.uk/iprog-pro-clone-v85-crack-free-download-install-on-win7-win10/