Yanhua ACDP module 19 is newly designed to work with Mini ACDP for SH725XX gearbox clone no soldering, no risk.
The test:
Gearbox type: BMW 7-dual-clutch (TEMIC DKG)
Connect Mini ACDP, Yanhua ACDP module 9, and gearbox properly as below
Run Mini ACDP APP
Go to BMW -> EGS -> DKG Clone (Supports E /F chassis)-> DKG436_Gen2 (TC1784)
Step 1: Identify
Start connecting devices, testing network, and loading hardware program
Make sure Mini ACDP and the gearbox have been connected properly
During the read/write data process, it is forbidden to unplug or plug the device and keep the device connected to the internet.
Identify the system info successfully
Then the data file is backed up automatically
Step 2: Full Backup Data
It reads the system info again and takes about 40s to read chip data.
When the chip data has been read out, then go to save the file
Step 3: Full Write Data
Disconnect Mini ACDP module 19 and the original gearbox, then connect to the new gearbox
Read the new chip data
Select the original chip data file to write in and wait the process to be done
The new YANHUA ACDP SH725XX Gearbox Clone Module 19 is selling like hotcakes at eobdtool.co.uk!