OBDSTAR DC706 with TCM V30.09 can perform EEPROM and Flash read & write operation on Mercedes- Benz GETRAG VGS2-FDCT/ VGS-FDCT/ VGS2-FCVT and BOSCH VGS NAG3 (9G TRONIC) on bench.
| Brand | ECU Brand | Type | Dump | Read eeprom | Write eeprom | Read flash | Write flash | Connection Method |
| BENZ | GETRAG | VGS2-FDCT | TC1784 | ✔ | ✔ | ✔ | ✔ | BENCH |
| BENZ | GETRAG | VGS-FDCT | TC1766 | ✔ | ✔ | ✔ | ✔ | BENCH |
| BENZ | GETRAG | VGS2-FCVT | TC1766 | ✔ | ✔ | ✔ | ✔ | BENCH |
| BENZ | BOSCH | VGS NAG3 (9G TRONIC) | ✔ | ✔ | ✔ | ✔ | BENCH |
OBDSTAR DC706 with TCM V30.09 read and write BENZ VGS2 FDCT TCM on bench:
Wiring diagram:
*The operation steps are the same as V30.01.
Benz GETRAG VGS/VGS2-FDCT TCM cloned with OBDSTAR DC706 on bench (with TCM V30.01)
http://blog.eobdtool.co.uk/benz-getrag-vgs-vgs2-fdct-tcm-cloned-with-obdstar-dc706-on-bench/
OBDSTAR DC706 with TCM V30.09 read and write Benz VGS2 FCVT TCM on bench:
Plug the power supply to DC706, keep charging and communication during the operation.
Menu path:
ECU Flasher>> TCM>> TCM V30.09>> BENZ GETRAG VGS2 FCVT TC1766 (BENCH)
Follow the Pinout to connect OBDSTAR DC706 ECU Tool and TCM with P004 Jumper and Adapter
After the harness connection is completed, start to connect ECU, and perform read/write operation.
Switch the ignition off and turn on
Connect to ECU successfully
Read INT eeprom, EXT eeprom, and INT flash- success
DC706 write INT eeprom, EXT eeprom, and INT flash- success
