Godiag GD101 J2534 Passthru Cable with the newest driver V2.3 can work with Consult III Plus V75.15.00 to diagnose Nissan vehicles. It has been tested on a Nissan engine ECU by eobdtool.co.uk engineer.
1.Free download godiag j2534 driver+ patch+ Nissan Consult III PLUS V75.15.00
Nissan Consult III PLUS V75.15.00
Software version: V75.15
Operating system: Windows XP and Windows 7/8/10 operating system. Cannot work on VISTA O/S.
Multi-languages available: English, Chinese, Finnish, French, German, Greek, Italian, Japanese, Portuguese, Russian, Spanish, Turkish, Thai, Czech, Polish, Hungarian
Compatible devices: Godiag GD101 J2534, Nissan Consult III Plus, PCMTUNER, VXDIAG VCX SE, Openport 2.0, etc J2534 device
2.Install Godiag J2534 V2.3 driver:
Run godiag j2534 v2.3 program
Select language, destination location, components, start menu folder, and additional tasks
Then install it
After installation, launch J1979 diagnostic tool, click “Check update” to check if the software and firmware version are the newest.
Now the software version is 2.3 and the firmware version is 1.9.
3.Run Nissan patch.exe on the desktop
Extract files to C:\CONSULT-III_plus\System\Application\Data\CommonSetting folder
Click “Yes to All”
4.Install Nissan Consult III Plus V75.15.00
Extract Nissan Consult V75.15.00 folder
There are two folders inside: C3P License and C3P_V75.15.00.
Open “C3P_V75.15.00” folder
Run “setup.exe” application
Install necessary components for consult iii plus
Click “First installation”
Accept the license agreement
Select your area
Select your country
Select your language
Select suitable units
Select a suitable unit: nissan, infiniti, datsun
Select copying file
Installing consult iii plus
Installing components
Installed Nissan consult-iii plus software successfully
4.Install Consult-III Plus patch
Open “C3P License” folder on the desktop
Open “C3PCheckLicense” application
Consult- III Plus is installed normally
Click on “Patch” to patch Consult III Plus
Patch ok
Step 4: Diagnose Nissan engine ECU
Connect Godiag GD101 J2534 Cable to Nissan ECU and computer
Open CONSULT III plus V75.15.00 on the desktop
It identifies the device serial No. and status.
Select Diagnosis (One System)>> ENGINE
Click “Close” when it appears “if some ECUs are not detected, turn ignition on and touch close”
Diagnose ECU successfully
