Autel MaxiIM IM508 and IM608 series released new VAG software update-reading IMMO data from VAG MQB48 series NEC35XX dashboard. To perform this function, it requires Autel APB130 Adapter to work together with the XP400 Pro so that it can add keys and read IMMO data for VW MQB NEC35XX, as well as several supported vehicles.
NOTE:
This VAG software upgrade is free during your Autel product membership. In case you do not have a membership or one of Autel devices supported by this purpose, please renew your annual subscription or acquire one of the devices.
Autel APB130 display:
Which Autel MaxiIM devices are compatible with?
Autel IM508S, IM608 PRO II (IM608 II), IM508, IM608 PRO with Autel XP400 Pro
Which vehicles are supported by Autel APB130 Adapter?
- Volkswagen MQB compatible chip model:
MQB NEC35XX Board (Johnson Control, VDO, Visteon)
- Supported Vehicles:
VW:
Arteon 2017-2021
Golf 2013-2021
Passat 2015-2021
Polo 2015-2021
T-Roc 2018-2021
Audi:
A1 2019-2021
A3 2021-2021
Q2 2017-2021
Q3 2019-2021
Seat:
Arona 2018-2021
Ateca 2018-2021
Lbiza 2018-2021
Leon 2013-2021
Tarraco 2019-2021
Toledo 2013-2019
Skoda:
Octavia 2013-2021
Fabia 2015-2021
Superb 2015-2021
Kodiaq 2017-2021
Kamiq 2020-2021
Radid 2013-2021
- Chip Types:
D703532, D70F3525, D70F3526, D70F3537, D70F3529
How to read VW MQB NEC35XX locked immo data with Autel APB130 Adapter and XP400 Pro?
1.Device and accessories required:
Autel IM508 or IM608 series tablet
Autel XP400 Pro Key and Chip Programmer
Autel APB130 VW MQB NEC35XX Add Key Adapter
VW MQB NEC35XX dashboard (chip type: i.e. D70F3529)
2.Operation
Select VW>> Expert selection>> MQB (beta) instrument cluster>> NEC35XX locked (via dump)>> D70F3529
Step 1: Read chip data via programmer
Step 2: Calculate IMMO Data
Step 1: Read chip data via programmer
Follow the lift pin connection diagram to solder mqb cluster
- Find position T1 in the figure and perform pin lifting
- Connect the FVDD line to the raised pin
Connect APB130 Adapter with Autel xp400 pro, connect xp400 pro with Autel MaxiIM tablet via USB cable, and also connect a 12V DC power adapter to xp400 pro.
After connection, start to read chip data. It takes about 5-10 minutes.
Save the original data after reading.
Step 2: Calculate IMMO Data
Upload the immo data just saved to decode
After decoding succeeded, save the new immo data
The vehicle IMMO info incl. VIN, CS code, MAC, etc is got. It can be used to make dealer key and learn key later.
Autel APB130 VW MQB NEC35XX Adapter is available at eobdtool.co.uk now.
https://www.eobdtool.co.uk/wholesale/autel-apb130-vw-mqb-nec35xx-adapter.html