OBDSTAR DC706 ECU Tool with P003 Adapter Kit can read/write EEPROM/Flash, and read IMMO data on VW 7GV & 9GV ECMs on bench successfully.
1.OBDSTAR DC706 R/W VW 7GV ECM on BENCH
2.OBDSTAR DC706 R/W VW 7GV ECM on BENCH
- All devices and accessories required:
OBDSTAR DC706 host
OBDSTAR P003 Kit (P003 Adapter+ ECU Bench Jumper)
Main cable
VW 7GV/ 9GV ECM
- Detailed operation:
Keep DC706 charging and communication through the process
Turn on OBDSTAR DC706 tablet
Select ECU Flasher>> All>> ECM>>ECM V30.17
Enter 7GV or 9GV in the search box to quickly find out the corresponding model below:
- VOLKSWAGEN MAGNETI MARELLI IAW 7GV 95320 (BENCH)
- VOLKSWAGEN MAGNETI MARELLI IAW 9GV CAN MPC5634+95320 (BENCH+P003)
Click “PINOUT” to check the related wiring diagram and follow it to connect the DC706 and ECM via OBDSTAR P003 Kit and main cable correctly
Supply the 12V power to DC706 ECU Tool
After connection, click “Start” to enter the operation interface
- For VW 7GV:
Connection:
Directly read/write data without clicking “Connect”
Read and write eeprom (95320) – ok
Read IMMO data by selecting “Read eeprom (95320)”- OK
- For VW 9GV:
Connection:
Click “Connect” to connect to ECU
Read eeprom (95320) and flash (MPC5634)- OK
Write eeprom (95320)- OK
Write flash (MPC5634)- OK
Read IMMO data by selecting “Read eeprom decrypted (95320)”
And click “Disconnect” to disconnect ECM and exit the job.
All right! It’s easy and fast to clone and read IMMO data on VW 7GV and 9 GV with OBDSTAR DC706 ECU Programmer via bench mode.