Which tool can do new key adding, all keys lost programming for Volkswagen MQB NEC35XX cluster on bench?
Eobdtool.co.uk engineer gives the suggestion below:
Xhorse VVDI Key Tool Plus Pad Full Configuration+ Xhorse MQB Authorization
Xhorse VVDI2 Full Version+ VVDI Prog + Xhorse MQB Authorization
Autel IM508/IM508S, IM608 II/IM608 Pro with Autel XP400 Pro+ Autel APB130 Adapter
Xtool X100 PAD3, PAD3 SE, IK 608 IMMO tablets + KC501
- Function tested: Read MQB NEC35xx Locked IMMO Data and Add New Key
- Supports Lift PIN and Cut PIN connection methods
http://blog.eobdtool.co.uk/xhorse-key-tool-plus-read-mqb-nec35xx-locked-immo-data-and-add-new-key/
VVDI Key Tool Plus MQB NEC3526/3525/3532 Dashboard Connection Methods:
http://blog.eobdtool.co.uk/vvdi-key-tool-plus-mqb-nec3526-3525-3532-dashboard-connection-methods/
- Function tested:
Read MQB data with Xhorse VVDI Prog
Decrypt IMMO data to add key with Xhorse VVDI2
- Supports Lift PIN and Cut PIN connection methods
http://blog.eobdtool.co.uk/how-to-program-vw-mqb48-vdo-jci-with-nec35xx-chip-by-vvdi2-vvdi-prog/
Xhorse VVDI2/Key Tool Plus VAG MQB48 NEC35xx Locked Cluster Number List:
http://blog.eobdtool.co.uk/xhorse-vvdi2-key-tool-plus-vag-mqb48-nec35xx-locked-cluster-number-list/
3.Autel IM508/IM608+ XP400 Pro+ APB130 Adapter
- Function tested:
Read chip data via programmer+ Calculate IMMO Data
- Attach VW/Audi/Seat/Skoda support list+ chip types
http://blog.eobdtool.co.uk/autel-xp400-pro-and-apb130-read-vw-mqb-nec35xx-locked-immo-data/
4.Xtool X100 PAD3, PAD3 SE, IK 608 IMMO tablets + KC501
Xtool tech adds VAG MQB all keys lost programming in the newest VAG software on September 10th, 2023.
VAG IMMOBILIZER Software V28.19
Add all keys lost programming for MQB cluster (on bench)
Add all keys lost programming for NEC35XX cluster (on bench)
Add key programming for IMMO4 MQB cluster
The function requires to use Xtool KC501 programmer.
Xtool KC501 V10.24
Adds DFLASH/PFLASH data read/write for VW MQB, VW NEC35XX clusters
Xtool KC501 is compatible with Xtool X100 PAD3, PAD3 SE, X100 MAX, D8, D8BT, D9, D9 Pro, A80, A80 Pro, A80 Pro Master, IK608, IP819 etc.
But no all devices support MQB (or doing less). X100 PAD3, PAD3 SE, IK 608 IMMO tablets + Xtool KC501 key chip programming tool are recommended.
Check update information and wiring diagram in the device.
Check MQB IMMO coverage on www.xtooltech.com
