Yanhua Mini ACDP-2 can add new BMW FEM/BDC key on bench no issues (Check here). Today, let’s learn how to use it to delete FEM/BDC key easily.
Operation process:
Make sure Yanhua ACDP-2 device is bound to ACDP-II APP correctly
Plug FEM/BDC bench integrated interface board (ACDP-2 Module 2) onto the FEM/BDC module, and then connect it to Mini ACDP 2. Also use the ACDP standard power adapter (voltage+ 12V, current≥ 2.5A).
In addition, you also can use Godiag FEM/BDC Test Platform to connect ACDP-2 and FEM/BDC module, no need Yanhua ACDP Module 2.
Run ACDP software
Select BMW >> FEM/BDC >> IMMO/ Mileage >> Delete key >> Delete key
Confirm Mini ACDP 2 connect to FEM/BDC
Device connection succeeded
Checking FEM/BDC device info…
Checking preprocess state…
Select key number first, then deleted the key
Reading the key list…
Select one used key (i.e. KEY2) and click “DELETE”
Delete key ID succeeded
Read the key list again
Now the Key 2 is unused.
Save the data successfully.
Mini ACDP-2 programmer deleted BMW FEM/BDC key successfully.