It has been tested and confirmed by eobdtool.co.uk engineer that ODIS Engineering 18.1.0 software is 100% working with VNCI 6154A (red) and VXDIAG VCX SE 6154 diagnostic tool.
Free download ODIS Engineering 18.1.0
Note: Free to test by your side. You are at your own risk.
Operating system: Windows 10 or more
Compatible devices: VAS6154 genuine devices or with passthru interfaces.
VNCI 6154 clone works fine after updating the firmware.
ODIS E-18 software installation guide:
1. Install ODIS-S V23 or V24
Unpack all files by WinRAR or another program.
Before starting the installation generate the appropriate license for your region of residence using Engineering License Generation.
2. Install OffboardDiagSetup-Engineering_18_1_0-0201_1. During installation indicate the license file that you generated earlier.
3. Open the Patch folder and copy OffboardDiagLauncher to the main folder (drive C / Program Files / OE).
4. Create a shortcut from the OffboardDiagLauncher file if the Odis E icon has not been created on the desktop.
5. Run Odis E from the icon on the desktop as administrator and after opening you will be asked to indicate where to download the database.
Specify the folder where you previously unpacked OffboardDiagSetup-Engineering_18_1_0-0201_1 (706 MB)
6. Select the database language from the one proposed and wait until the installation is finished.
Then restart the computer.
7. Open the MCD-Projects-E folder and copy the projects
The place where you should copy the MCD-Projects-E folder is Disk C/ProgramData/OE/ MCD-Projects-E / VMCD.
Then the ODIS Engineering 18.1.0 can be used with VNCI 6154A VAG diagnostic tool and VXDIAG VCX SE 6154.