Some customers said that after the 2M2 tank APP automatically downloaded and updated, the 2M2 Magic Tank key cutting machine was locked and prompted to unlock and could not be calibrated. Next is to repair according to the following scheme
The solution:
Step 1: Turn on 2M2 Magic Tank APP, and then connect the machine by Bluetooth
Step 2: Enter “Settings”-> “Machine data”
1.When 2m2 tank=2, PCB=113, Structure=104?
Please enter “Update”-> click “2021061101” to update
2.When 2m2tank=0, PCB=111, Struction=104?
Enter “Update”-> click “2” to update-> waiting to finish
Restart the 2m2 tank key cutting machine and APP
Connect the machine by Bluetooth
Enter “Update”-> click “2021061101”-> wait till finish
3.When 2m2tank= ?, PCB=112, Struction=104?
1).Enter “Settings”-> click “TANK” for 10 times (after connected by Bluetooth) is shown as below
Click it till the machine sound.
2). Restart the machine and APP
Connect the machine by Bluetooth
Enter “Setting” -> click “TANK” for 10 times (after connected by Bluetooth) and till the machine sound
Restart the machine and App
Connect the machine by Bluetooth
Enter “Settings”-> “Machine data” to check if it is “PCB=111, structure = 104”.
Tech support: