This post comes with the guide to program blank Nissan TCM module by SVCI ING Nissan diagnostic tool.
Before the program, please perform the following steps first.
Step 1: Download SVCI ING V1.0 or V1.1
Note: The difference is SVCI ING V1.1 has two methods to connect SVCI ING Nissan device to computer- via Bluetooth or USB cable, while V1.0 only supports Bluetooth connection.
System Requirements:
Windows: windows7/8/10
Android: Android V5.1 above
Network: 3G above
Step 2: Install SVCI ING BAOCHI Cloud Diagnostic software
Step 3: Register SVCI ING BAOCHI software account (for the first time to use)
Step 4: Bind SVCI ING in BAOCHI software on Windows/ Android platform (for the first time to use)
Note: one email can only bind one device in software. If there are multiple devices that need to unbind an old device from the software and then re-bind the new device.
For more details about download link, installation, registration, device bind and unbind guide, please refer to this article:
http://blog.eobdtool.co.uk/svci-ing-baochi-cloud-diagnostic-software-download-register-bind-unbind/
Start to program Nissan TCM module
TCM module: Nissan XA 310F6 1VA5A -120N A1 3603
Connect TCM module with SVCI ING interface and 12V power adapter
When the left indicator of the device turns on and the right indicator flashes, that means the connection is normal.
Plug the SVCI ING Bluetooth dongle to laptop
Add a Bluetooth device
The Bluetooth state is on
The PC will discover the Bluetooth device automatically, and then pair
Note: The Bluetooth number is same as the serial number of the SVCI ING device
Run BAOCHI Cloud Diagnostic software
Login with email and password you have registered
Select Special functions-> Re/programming-> Replacement/Blank-> TCM
Select the operation mode (recommend choose Default option), and press OK
Select the proper file and press OK
Follow the on-screen tips to turn off the ignition and replace TCM, then turn ignition ON
Compiling data…
Keep battery voltage 12V above
Transfer data to SVCI
Start programming
Note: Don’t interrupt the device connection
It takes about 4 minutes to program TCM module
TCM module programming completed
Turn ignition OFF/ON several times, click OK and clear DTC
Program TCM successfully, turn ignition off
SVCI ING Program TCM module on Windows system video demo:
SVCI ING diagnostic tool for Infiniti/Nissan/GTR:
http://www.eobdtool.co.uk/wholesale/svci-ing-infini-tinissang-tr-diagnostic-tool.html